- Silicone Water Repellent
- Water Based Water Repellent
- Gypsum Water Repellent
- Silane Impregnant
- Waterproofing Admixture
- Super Hydrophobic Water and Oil Repellent
- Waterproofing Coatings
- Ceramic Water Repellent
- Distribution Agent Wanted
- Personal Care
- Agricultural Adjuvant
- Textile Auxiliaries
- Pump Oils
- Silane Coupling Agent
- Silicone Foam Stabilizer
- Silicone Fluids
- Silicone Sealant
- Silane Crosslinking Agent
- PFPE Oils
- Silicone Rubber
- Silicone Antifoam
- Silicone Intermediate
- CAS Index
Methyl Hydrogen Silicone Fluid RJ-202※MSDS Download ※TDS Download Inquiry
Synonyms: Polymethylhydrogen Siloxane Fluid; Poly methyl hydrogen siloxane; Methyl hydrogen silicone oil; Methyl hydrogen polysiloxane, Polymethylhydrosiloxane
Cas No: 63148-57-2
Methyl Hydrogen Silicone Fluid RJ-202 is nontoxic and insipid. As there are fair quantity of relatively active Si-H bonds inthemolecule, under the action of catalysts it can react with chemicals containing active groups, such as double bonds or hydroxyl groups.
Poly methyl hydrogen siloxane can be converted into film and used to produce a resilient waterproof coating on various materials by using metal salt catalyst at low temperature. It equips itself with outstanding water repellent property which prevents damage due to moisture, as well as mildew and rust development. Besides, its high vapor permeability allows the material to breathe and let water, vapor escape to the outside without causing damage.
The quality of RJ-202 has already been approved by some of the world's largest gypsum board manufacturers.
Fig.2-9 RJ-202 For Gypsum Board Waterproofing Testing
Colorless, tasteless and transparent liquid
Viscosity(at 25°C, mm2/s)
Volatile Content: (150°C, 3H), %
Flash Point, °C
1. Hydrogen Content%＞1.58%
2. Gypsum Water Absorption, 2Hours＜5%
1.Mainly used as water repellent for gypsum, powders, glass, ceramic, leather, paper, metal, cement and marble, it is especially suitable to be used as gypsum board water repellent, a small dosage will make the gypsum water resistant.
2.Widely used in the finishing of all kinds of fibers such as cotton, hemp, silk, nylon, polyester.
3.Used as the cross linker for additional type silicone rubber series.
4.Used as the basic material and a fundamental intermediate to synthesize some modified silicone oil including polyether modified silicone oil and alkyl based modified silicone oil.
5.Used as hydrophobic agent, lubricant and antisticking agent of oily based foundation of cosmetics
Poly methyl hydrogen siloxane RJ-202 is available in N.W 200KG hard plastic barrel or 1000KG IBC Tote.
Sealed and store under 5-30℃ temperature. Avoid high temperature and freezingcondition
Original characteristics remain intact for 1 years, if kept in recommended storage.