- Silicone Water Repellent
- Personal Care
- Agricultural Adjuvant
- Textile Auxiliaries
- Pump Oils
- Silane Coupling Agent
- Silicone Fluids
- Silicone Sealant
- Silane Crosslinking Agent
- PFPE Oils
- Silicone Rubber
- Silicone Additive
- Silicone Antifoam
- Silicone Intermediate
- Silicone Release Agent
- Silicone Release Agent For Metal Casting
- CAS Index
Silicone Release Agent RJ-6017E※MSDS Download Be Without TDS Download Inquiry
RJ-6017E is a silicone emulsion made for metal die-casting demoulding. The main active component of RJ-6017E is liquid polysiloxane modified by long alkyl and aryl groups(RJ-6017). For its high temperature resistance and good demould ability, it can be used as release agent for metal(Aluminum, Magnesium, Zinc, etc.) die-casting.
● Outstanding demoulding ability
● Bright and clean surface after demoulding
● Low influence to after treatment
|Appearance||Milky white liquid|
680-720ºC for instant
280-320ºC for long time
Application & Usage notice
RJ-6017E release agent has strong lubrication and impact resistance.When the mold release agent is sprayed on the surface of the mold, a compact film is immediately formed on the surface of the mold. The film is resistant to high pressure and scour during the injection process, effectively preventing the adhesion of the die casting products to the mold and preventing the product from changing.
RJ-6017E can effectively solve the problems such as darkness and rust of the casting’s surface caused by oxidation. It is very simple and convenient to use. Reduce the number of mold cleaning, keep product surface clean, bright, do not affect after treatment of casting.
RJ-6017E is a non-toxic, non-burning, non-corrosive, environmentally-friendly emulsion release agent without any chemical reaction. It can be diluted directly with water in the process of use, and does not contain harmful smoke.
Dilute RJ-6017E with deionized water before use (100-300times, recommended simple test before use). Warm up mould to 70-150ºC so as to ensure the effect of spraying. Spray RJ-6017E after cleaning the mould to ensure the agent is rightly adhered.
RJ-6017E is available in 50kg, 200kg plastic barrel.
This product is stored and transported according to non-dangerous goods. Should be stored in dry and ventilated shade, avoid strong sunlight, avoid contact with acid, alkali.
Shelf life: 6 monthsInquiry